Flush Metal

Get your Flush Metal parts for Flush Metal brand partitions here on our partitions and parts web store. Our website has affordable Flush Metal parts for sale for replacing on your Flush Metal bathroom partitions.

Check out the Flush Metal hardware for partitions that we have available such as Flush Metal handles and latches, Flush Metal brackets, Flush Metal cam housing and more. Many of the Flush Metal partition parts we have are in stock right now, so you can make a purchase today.

Flush Metal is a reputable manufacturer of Flush Metal stalls and Flush Metal partition hardware. At Robert Brooke & Associates (RBA), we distribute Flush Metal parts for stalls online for quick and convenient access to the items.  

Flush Metal Parts Manufacturer

Flush Metal Partitions LLC manufactures phenolic, plastic laminate and steel bathroom partitions. The company manufactures the replacement Flush Metal parts that go with their stalls, too.

Our company, RBA, distributes Flush Metal hardware. We have witnessed the performance of Flush Metal hardware over time and Flush Metal hardware exceeds expectations of standard bathroom partitions products.

Flush Metal Partitions LLC has been up and running for half a century and they put that experience toward making Flush Metal parts and products that transcend typical durability of bathroom partitions parts. The plant where they make Flush Metal hardware is in New York, but at RBA we will ship Flush Metal parts anywhere in the United States, Canada, and to countries overseas.

Flush Metal Partition Hardware

Are you looking for specific Flush Metal parts such as Flush Metal handles and latches? We have a variety of Flush Metal handles available to be shipped now.

The Flush Metal Toilet Partition Concealed Latch Knob & Cover is one of the Flush Metal handles that we carry that can be used to close and lock a stall door. You can also try the version of this knob that adheres to guidelines of The Americans with Disabilities Act of 1990.

You could also consider Flush Metal Slide Bolt Latches to be Flush Metal handles that close and keep stalls door shut. These Flush Metal handles (or latches) were made by die casting Zamak metal. Zamak is generally accepted as a commonly used metal on partitions parts.

We have the Flush Metal Top Hinge Escutcheon (also known as Flush Metal Top Door Insert). You can also look into the Flush Metal Bottom Door Insert for ⅞ inch doors.

Not only do we have Flush Metal handles, Flush Metal latches, Flush Metal escutcheons and Flush Metal brackets, but we also have so many other Flush Metal parts that you might find useful. Our RBA Partitions and Parts Catalog contains more detailed information on Flush Metal partition parts. Take a peek and let us know if you have any further questions on Flush Metal partition hardware.

Our friendly staff is here at the office Monday through Friday from 8 a.m. to 5 p.m. EST. Get in touch with us by phone on weekdays with your inquiries about Flush Metal hardware so that we can immediately assist you. If you find yourself with questions about Flush Metal hardware on the weekend, please send an email to Sales@RobertBrooke.com and we will get back to you the next business day.

View as Grid List

27 Items

per page
Set Descending Direction
  1. Flush Metal Concealed Turn Latch & Cover

    Flush Metal concealed turn latch knob and cover plate with set screw is the current style. This turn latch is one of a kind, under the cover plate and under the turn latch you will notice a diamond shape that are male - female. Only buy this if this is what you have exactly. Many of these parts look the same but are not and will not work unless this is what you have. Manufactures #143520. This part has a 1-3/8" diameter.

    9FL143
    $14.30
  2. Flush Metal Latch Knob Cover

    Flush Metal Toilet Partition Concealed Latch Knob And Cover

    Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 1390, 6140.

    9FL325
    $8.22
  3. Flush Metal Ada Latch Knob Cover

    Flush Metal Partition Concealed Ada Latch Knob Cover Chrome Plated

    Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". The ADA Barrier Free Lever is 2-9/16" long when measured from the all the way across the cover. The cover has an overall depth of 1-1/4". Also known as a Bathroom Stall Concealed ADA Latch Cover and Knob Assembly. Manufacture part # 6150

    9FL325A
    $12.65
  4. Flush Metal Top Hinge

    Flush Metal Partitions Top Hinge For 1-1/4" Round Edge Post

    Chrome plated Zamac die cast construction. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 3/8" diameter. Also known as a Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3510.

    Shipped with mounting screws.

    A=1-7/6"

    9FL100
    $10.12
  5. Flush Metal Bottom Hinge

    Flush Metal Partitions Bottom Hinge For 1-1/4" Round Edge Post

    Chrome plated Zamac die cast construction. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010.

    Shipped with mounting screws.

    A=1-7/6"

    9FL200
    $10.12
  6. Flush Metal Nylon Cam

    Flush Metal Partitions Nylon Cam For Steel

    White nylon plastic construction. Square part of nylon cam is 7/8" by 1-1/8" with a diameter of 11/16". The cam has an overall heigth of 1-1/4", with a cylinder diameter of 7/8". Also known as a Bathroom Stall Cam. Manufacture part # 98185

    9FL225
    $2.15
  7. Flush Metal Nylon Cam

    Flush Metal Partitions Nylon Cam

    White nylon construction. The partition cam head outside diameter is 23/32" and the inside diameter is 1/2". The cams cylinder is 1-13/32" long with a diameter of 5/8". Also known as a Bathroom Stall Cam. Manufacture part # 98275.

    9FL725
    $3.80
  8. Flush Metal Pintle

    Flush Metal Partitions Pintle 5/8" Diameter For Steel Doors

    Steel and white nylon construction. The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175.

    Shipped with nut and lock washer.

    9FL250
    $4.43
  9. Global Complete Hinge Set with Rounded Edge

    Global Complete Hinge Set with Rounded Edge. Used currently with these factories Global, General and Flush Metal and Accurate Partitions. Complete as shown in picture with the parts. Includes top pin, top hinge, bottom cam, pintle and bottom hinge and security screws. Used with powder coated steel and stainless steel partitions with a slight round edge. These will not work with old original Accurate Partitions prior to 2013. Used 2013 to current with Accurate Partitions.

    9G663140
    $29.00
  10. Flush Metal Latch Housing

    Flush Metal Partitions Concealed Latch Housing

    Zamac die cast construction. The latch body measures 3-3/8" deep by 1-15/16" high. The face plate is 3-1/4" high. The latch bolt is 11/32" diameter and has a travel of 7/16". Also known as a Flush Metal Bathroom Stall Concealed Latch Housing. Manufacture part # 6606. This part has a 1-1/4" diameter.

    9A6606
    $10.63
  11. Flush Metal Top Hinge Casting

    Flush Metal Partitions Top Hinge Casting For Metal

    Unplated Zamac die casting construction. The outside dimensions of the top hinge casting are 5-1/8" high by 2-5/8" deep by 25/32" wide. Two of the three holes are 3/8" diameter, and the other hole is threaded for a 5/16-18 screw. Also known as a Bathroom Stall Door Insert - Top 1". Manufacture part # 4556.

    9FL265
    $13.92
  12. Flush Metal Top Hinge Pin 3/8" x 3-1/4"

    Flush Metal Top Hinge Pin For Laminate Partitions

    Threaded steel construction. The top pin measures 3/8" diameter by 3-1/4" long with 5/16-18 threads. It has a screw driver flat slot on one end. Also known as a Bathroom Stall Door Top Hinge Pin. Manufacture part # 98584.

    9FL125
    $3.48
  13. Flush Metal Bottom Cam Housing Chrome Plated

    Flush Metal Partitions Bottom Cam Housing

    Chrome Plated Zamac die casting. The bottom cam housing measures 1-3/16" wide by 3" deep. The screw hole is 9/32" diameter. Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4090.

    9FL275CH
    $10.12
  14. Cast Stainless Steel Bottom Hinge for 1-1/4" Sq Edge

    Cast Stainless Steel Bottom Hinge for 1-1/4" Sq Edge

    Cast stainless steel construction. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a General Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3293.

    Shipped with mounting screws.

    a=1-5/8"

    This is a replacement for the Zamac Die Cast hinges for General, American Sanitary, Flush Metal and Fiat Partitions.

    9A3293
    $23.00
  15. Cast Stainless Steel Top Hinge for 1-1/4" Sq Edge

    Cast Stainless Steel Top Hinge for 1-1/4" Sq Edge

    Cast Stainless Steel construction. The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3793

    a=1-11/16"

    also known as general, american sanitary, flush, fiat

    9A3793
    $23.00
  16. Slide Bolt Latch SS

    Toilet Partition Slide Bolt Latch Stainless Steel

    Cast stainless steel construction. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch and Toilet Partition Locks. Manufacture part # 5023.

    Shipped with mounting screws.

    also known as 9F0302SS

    9A5023
    $23.00
  17. Flush Metal Concealed Keeper Bumper 1-1/4" Round Edge

    Flush Metal Toilet Partition Keeper Bumper For Concealed Latches 1-1/4" Round Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510.

    Shipped with mounting screws.

    9FL400
    $7.40
  18. Flush Metal Top Hinge

    Flush Metal Toilet Partitions Top Hinge For 1-1/4" Square Pilaster Or Post

    Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a Flush Metal Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3790

    A=1-5/8"

    9FL600
    $9.61
  19. Flush Metal Coat Hook Bumper

    Flush Metal Partitions Coat Hook Bumper

    Chrome plated Zamac die casting construction. Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4000.

    9FL450
    $3.07
  20. Flush Metal laminate Top Hinge Pin

    Flush Metal Partitions Top Hinge Pin Laminate Hinge Pin 3/8" Diameter X 3-7/16" Long

    Knurled steel construction. Hinge pin is 3-1/2" long by 3/8" diameter. The knurled end has a threaded hole of a 10-24 screw. Also known as a Bathroom Stall Hinge Pin. Manufacture part # 99109.

    9FL625
    $3.80
  21. Flush Metal Pintle 1/2"

    Flush Metal Pintle 1/2" Diameter

    White nylon and steel construction. The pintle is 1/2" diameter by 2-5/16" high. The threads are 5/16-18. Also known as a Bathroom Stall Pintle. Manufacture part # 98265.

    Shipped with lock washers and nut.

    9FL750
    $3.80
  22. Flush Metal Slide Bolt Latch

    Flush Metal Slide Bolt Latch

    Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.

    Shipped with mounting screws.

    9FL800
    $8.60
  23. Flush Metal Top Door Insert

    Flush Metal Partitions Top Hinge Escutcheon For 7/8" Thick Door

    Chrome plated Zamac die casting. Top hinge insert outside dimensions are 2-3/8" by 1" wide by 1-5/8". Two of the three holes are 13/32" diameter and the third is 7/32". Also known as a Bathroom Stall Door Inser Top 7/8". Manufacture part # 1540.

    Bobrick also used this insert.

    9FL650
    $6.33
  24. Flush Metal Keeper Bumper

    Flush Metal Partitions Keeper Bumper For 1-1/4" Outswing Square Edge Pilaster Or Post

    The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210 Shipped with mounting screws.

    9FL900
    $8.50
  25. Flush Metal Partitions Bottom Door Insert For 7/8" Door

    Flush Metal Partitions Bottom Door Insert For 7/8" Door

    Chrome plated Zamac die cast construction. The door insert measures 2-5/16" wide by 1" wide by 1-3/16" high. The hex shaped hole is 5/8" and the round hole is 7/32" diameter. The material or rim is 5/16" high. Also known as a Bathroom Stall Door Insert Bottom 7/8". Manufacture part # 1530.

    9FL775
    $5.06
  26. Flush Metal Keeper Bumper Inswing

    Flush Metal Toilet Partitions Keeper Bumper For 1-1/4" Inswing Square Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110

    Shipped with mounting screws.

    9FL925
    $8.50
  27. Flush Metal Bottom Hinge

    Flush Metal Toilet Partition Bottom Hinge For 1-1/4" Square Edge Post

    Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a Flush Metal Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3290

    Shipped with mounting screws.

    a=1-5/8"

    9FL700
    $9.61
View as Grid List

27 Items

per page
Set Descending Direction